FCI provides flow switch to protect from dry operating

Fluid Components International’s twin alarm FLT93 Series circulate change supplies an early warning alert to the potential of dry operating circumstances, cavitation and different pump issues that can lead to emergency shutdowns and expensive upkeep.
The FLT93 Series circulate swap reliably displays the flow and temperature of liquids, gases, and slurries. – Image: Fluid Components International
FCI’s FLT93 Series circulate swap reliably screens the circulate and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, where sudden, surprising reductions in media flow rates can go away pumps susceptible to over-heating circumstances that shutdown process lines and require troubleshooting and fixing. เครื่องมือวัดความดัน rated instrument is intended for heavy-duty, potentially hazardous course of trade environments and comes with a complete listing of global safety approvals.
It has a no transferring elements design and presents a robust scheme for pump safety with its twin alarm functionality. With Alarm 1, the change detects a low move state of affairs anyplace between 0.01 and three ft per second FPS (0.003–0.9 m per second MPS). This low move alarm is a pre-warning sign for the management system or operator who can then decide to keep the pump operating or to shut it down.
If an Alarm 2 occurs because the feed line to the pump is working dry, this is in a position to be an emergency sign to close down the pump immediately because the bearings now see gasoline instead of a liquid as a heat transfer media. In such situations, the temperature of the bearings might rise very fast. Using a circulate swap prevents permanent injury to the pump’s bearings.

Leave a Comment