Is it possible for connecting a non-incendive Ex nA digital indicator to an intrinsically safe Ex i sensor in hazardous areas? Last Minute , signals from pressure sensors that not have a built-in digital indicator for the measured value are connected to external digital indicators. These digital indicators enable an on-site display of the measured value and, thus, a convenient and immediate reading of, for instance, the particular level in storage vessels.
Pressure sensors for hazardous areas are frequently made with the ignition protection type ?intrinsically safe?, since this allows interventions within an active electrical circuit and less energy is necessary. However, this also implies that there’s insufficient energy available for a robust measured value display. Therefore, digital indicators are often designed with ignition protection types that enable more current and voltage to be allowed. Frequently, digital indicators are designed as ?non-incendive? (Ex nA). This ignition protection type enables power-hungry instruments to be operated in Ex areas too. However, Ex nA is limited for use in zone 2 ? so in areas in which an explosive atmosphere only rarely occurs.
The right connection of digital indicator and barrier
Non-permissible connection of an Ex i pressure sensor with isolated barrier and Ex nA digital indicator.
Every Ex i sensor requires an intrinsically safe barrier because of its voltage supply, so that the interconnection is considered as intrinsically safe and the benefits, such as maintenance work with no need for a fire certificate, may be used. Digital indicators are generally integrated as passive element, with or without an external power supply, directly in the 4 ? 20 mA current signal of a sensor. Since an Ex nA digital indicator has no Ex i performance data in its approval, it cannot therefore be utilized in a ?Proof of intrinsic safety?. Therefore, an Ex nA indicator can’t be connected in an Ex i circuit.
Correct connection of an Ex i pressure sensor with isolated barrier and Ex nA digital indicator.
There is, however, the chance to connect a digital indicator having an Ex i pressure sensor in zone 2. The prerequisite is that the intrinsically safe isolated barrier also possesses an Ex nA approval and must be installed in zone 2.
Read also our articles
Ex barrier and intrinsically safe pressure sensors ? an inseparable pair
Proof of intrinsic safety for an ATEX-approved pressure sensor
Note
Should you need any help with selecting a suitable solution for your pressure measurement requirement, your contact person will gladly help.

Leave a Reply