Pressure transmitters and pressure gauges can be adapted to almost any process condition using valves, protective devices and/or fittings. WIKA offers such combinations by means of a ?hook-up?, an application-specific and ready-to-install solution. It eliminates all the disadvantages that users experience with the choice to do the assembly themselves.
1. The logistical effort:
That is considerable. Measuring instruments, valves and other accessories, if they’re brought together in-house, usually should be sourced from different manufacturers, frequently from more than two companies. The order processes should be coordinated, which may be time-consuming. Furthermore, supplier management requires additional resources.
2. Compatibility problems (threat of leakage):
Combinations of pressure measuring instruments with instrumentation valves and accessories are not standard solutions. Both components of such an assembly generally come, as stated, from different manufacturers. This increases the probability of complications during assembly.
The difference in these measuring arrangements with differential pressure gauges is obvious ? on the left, a good example of an assembly made by the operator themselves, on the right, the hook-up solution from WIKA.
A good example of this, shown here, may be the mix of a differential pressure gauge with a valve manifold. The connection of the measuring instrument has a different centre distance than that of the selected valve manifold (picture left). In such a case, the connection may be accomplished via an assembly with two pipe pieces and four adapters. But this solution escalates the outlay in time and expense, plus the threat of leakage, by doubling the sealing points (see arrow marks). Difficulties in assembly also arise if the tolerances of the bond interfaces from different suppliers do not match exactly. This also carries the risk of leakage. In order to achieve the desired compatibility, the qualification and delivery specification should be defined for every supplier with considerable effort.
เกจวัดแรงดันน้ำ10บาร์ of hook-up solutions:
Left: Pressure gauge with overpressure protector, a valve to separate the measuring instrument from the process and a siphon tube that protects the entire measuring arrangement from excessive temperatures.
Right: Pressure gauge with overpressure protector and monoflange (this permits separation of measuring instrument and process regarding flange connections).
3. The installation effort:
On top of certain requirements for the procurement of suitable components, will be the assembly charges for measuring points with instrumentation valves and accessories also added. These range from the development of special know-how and employee training to the provision of a suitable workplace, including tools and the necessary materials. Furthermore, a quality control is mandatory to check on the functionality and reliability of the measuring arrangement, especially its leak tightness. This is especially important if, for instance, it is a process with critical gases.
Avoidance of risks
With a hook-up solution, users circumvent the efforts and potential risks described here. The measuring arrangement is assembled at WIKA (based on the specified process parameters and the installation situation) from qualified individual parts and is tested for leaks. It really is ready for installation along the way on delivery. If necessary, a measuring instrument can even be coupled with several instrumentation valves and accessories (see illustration left).
Note
Detailed information on valves and protective devices are available on the WIKA website.

Leave a Reply